Buy Direct from Tony Nijhuis Designs Plans, CNC Packs, Wood Packs
& Vac Mouldings

72” Short Sunderland Plan Dec 2008/Jan 09 by Tony Nijhuis

 Click here to download the RCM&E build article in PDF format

Please click here for the recommended electric setup

The 72” Sunderland follows a similar design philosophy as both the Boeing B-17 and the Avro Lancaster. The plan features fully built up construction using balsa and plywood. The fuselage is slab sided structure with a rolled balsa top and the hull made from cross sheeted the underside. The use of a fuselage jig will help the fuselage build. The wings are a built-up structure of ribs over a main spar and balsa sheeted. The tailplane and fin are both constructed from solid sheet balsa.
The prototype was fitted four 200watt brushless motors and used a 2000mah Lipo battery pack per motor.
The model although not flown off water should be able to without too much fuss. The prototype had no undercarriage fitted and had sufficient power to take off from grass, although both long or wet short grass will aid take off.

The plan is full-size on two sheets

The VAC form set includes the cockpit canopy, forward, upper and rear turrets and four radial cowls.

The CNC pack contains all the fuselage formers, wing seats, hull spine, wing ribs and the nacelle structures

Please Note
Although we carry selective stock, we generally print and manufacture to order so deliveries may take up to 28 days to reach you from point of order. Also delivery of plans, some plastic parts and CNC wood packs will be sent as separate consignments.

For overseas orders please Email us